What is a Circlip? A circlip is a type of fastener consisting of a semi flexible ring with ends open. It prohibits lateral motion between the different parts of a machine but permits rotary motion. The word circlip is a portmanteau (combination of two words) of circle and clip. Circlip is also known as C… Read More: Circlip and its Types [Explained with Images] »
Rigid Body Motion or Motion of a Rigid Body In this article we will try to understand motion of a rigid body and its different types. But before moving further in our topic let us first understand the definition of a rigid body. A rigid body is a solid body in which the distance between… Read More: Rigid Body Motion | Explained with Types »
Set screw (also known as Grub screw) is a special type of screw which is used to prevent relative moment of two parts. Unlike screw, a set screw is threaded over its entire length. In many applications, a setscrew is used instead of key to prevent relative motion between the hub and the shaft. The… Read More: Set Screw | Material Selection, Point Types, Applications »
Nuts are internally threaded fasteners. They have internal tapping. They are generally meant to be used with bolts. Together nut and bolt is used to assemble mechanical parts. Bolt is a male part and nut is a female part. Nuts are generally made of metals. Types of nuts There are basically two types of nuts… Read More: Nut | Types and Material Selection [Explained in Detail] »
A bolt is a type of threaded fastener (like a screw) and is a male part. It is generally made of a metal. It is used to keep two or more hardware parts together (in a specific position). Shank of the bolt is only partially threaded, just to accommodate a nut. A bolt is sometimes… Read More: Bolt | Types, Parts, Manufacturing, Material Selection, Applications »
Screws are fasteners with helical grooves on their shank. These grooves can be either throughout the shank or only in the beginning. These grooves provide necessary friction and traction to avoid pull-out. They are generally made from a metal. A screw is sometimes also known as cap screw or tap bolt. Note: Those who don’t… Read More: Screw | Types, Parts, Manufacturing, Material Selection, Applications »
What is a Hydraulic Jack? Before directly jumping on to Hydraulic Jack, let’s first understand ‘Jack’. A jack is a device which is used to lift heavy loads. A jack could be Mechanical, Electrical or Hydraulic, based on the method of force generation. A hydraulic jack works on the basis of Pascal’s law. A small… Read More: Hydraulic Jack | Working, Application, Advantage, Disadvantage »
What is a lead screw? Lead screw is a type of screw which is used as linkage in machines. It converts rotary (or turning) motion into linear motion. Due to large contact area between male and female members of a lead screw, it has very high frictional losses. Advantages of lead screws They are generally… Read More: Lead Screw | Applications, Advantages, Disadvantages, Types »
What is a chain drive? Before understanding chain drive, let us first understand ‘What is a Chain?’. A chain can be defined as a series of links connected by pin joints. Now we can move on to chain drive. A chain drive consists of an endless chain wrapped around two sprockets. Advantages of chain drive… Read More: Chain Drive | Definition, Types, Advantages, Disadvantages »
What is a Brake? Brake is a mechanical device which absorbs kinetic energy of moving systems and brings them to rest. This absorbed kinetic energy is converted into heat and then dissipated to the environment. One of the well-known use of brakes is in automobiles, where they are used to either slow down or stop… Read More: Brakes I Definition, Types, Advantages, Disadvantages [Full Guide] »